Top Luxury Cars | 2010 Acura RL

Acura RL - What the Auto Press Says

The 2010 Acura RL ranks 3 out of 13 Luxury Large Cars. This ranking is based on our analysis of 8 published reviews and test drives of the Acura RL, and our analysis of reliability and safety data.

The 2010 Acura RL doesn't carry the same cachet as some more well-known luxury cars, but it's an excellent choice for many buyers. With outstanding cabin electronics, bulletproof Honda reliability and resale value, and a price that doesn't climb high when you start adding options, it's a great value.  But some reviewers say it is underpowered for its price, and short on space for its size.

While most large luxury cars offer just slightly different takes on the same high-power formula, the Acura RL is a little different. There is no supercharged V8 offered here. That's not to say the RL isn't sporty - its unique SH-AWD system (that's "Super Handling - All Wheel Drive") means it holds a precise line in a hard corner - but the RL is more about agility than speed, and more about high-tech digital luxury than old world leather-and-wood elegance.

The RL's 3.7-liter V6 is nothing you'd find in a more affordable car. It makes a V8-like 300 horsepower.  But it can be a beat slower than many V8-powered cars, and reviewers are disappointed with the car's 16/22 mpg EPA rating -- the RL actually ranks in the bottom half of its class for fuel economy even though uses two fewer cylinders than most of its rivals.  That SH-AWD system, however, makes it fun to drive. The system actually helps to steer the car, varying the speed of each wheel independently to point the car into turns while maintaining excellent grip.  It gives the car an entertaining personality on a winding road.
Other Cars to Consider

But those truly looking for an athletic large sedan will want to try out the superbly balanced BMW 5-Series, or perhaps the muscular Jaguar XF.

Those cars, however, might not be the RL's most direct rivals. If the RL interests you, there's another car you should consider before laying money down. The RL's smaller sibling, the Acura TL, is worth a look.  It isn't much smaller, and the two cars share so many mechanical components that buyers might find the TL essentially offers the RL experience at a discounted price.
Acura RL: The Details

The RL is offered in just one trim level for 2010, an available Technology Package adds a voice-controlled navigation system with traffic and weather updates that, some reviewers say, is the best one found anywhere. A Technology Package with Collision Mitigating Braking System increases the safety quotient.

 

Top Luxury Cars | 2010 Infiniti M

Infiniti M - What the Auto Press Says

The 2010 Infiniti M ranks 2 out of 13 Luxury Large Cars. This ranking is based on our analysis of 55 published reviews and test drives of the Infiniti M, and our analysis of reliability and safety data.

Sold as the V6-powered M35 and the V8-powered M45, Infiniti’s top-of-the-line sedan is a high-performance machine.   It doesn’t sell as well as some better-known rivals, but some in the automotive press aren’t sure why.  It’s a well-rounded sport sedan, though it may ride too firm for some.

Car and Driver sums up the typical opinion of the automotive press perfectly when it says, “Infiniti's M sedans offer excellent value, space, luxury, and performance--it's too bad more folks don't notice."

The M35 and M45 sedan are not often mentioned in the same breath as some of the better-known large luxury sport sedans.  But many reviewers think they should be.  Infiniti’s flagship sedan offers a stylish cabin with an appealing modern design theme and exceptionally comfortable seats, and the ability to corner with some of the best sport sedans on the market.   It can’t match the raw engine power of a Jaguar XF, but reviewers say its handling balance rivals anything else in the class – which may be more important than horsepower to those looking to have some fun on a routine drive.
Other Cars to Consider

The 2010 Infiniti M's sporty character might be too much for some.  Those looking for a comfortable commuter might be better suited by a Lexus GS or Acura RL.  The M doesn’t insulate its driver from the road like those cars – it engages the driver in the drive, much like the BMW.  M sedans equipped with the Sport package are particularly stiff – stiff enough to turn off some reviewers who like the sporty nature of the standard car.

Those considering the M precisely because of its sporty nature might want to test drive the BMW 5-Series, the large-sedan cornering champion, or the powerful XF before buying.
Infiniti M: The Details

The M comes as either the M35, with a six-cylinder engine or the M45, with an eight-cylinder engine. Both models are available in a base rear-wheel drive, a Sport edition with a firmer, sport-tuned suspension and a revised front fascia, and an X edition with all-wheel drive.

The M was first offered in the 2005 model year, and has changed little since then.  It is due for a complete redesign for the 2011 model year, so those who can afford to wait might find a better deal on the 2010 M once the 2011 has begun rolling into dealerships.

Mercedes-Benz E-Class - What the Auto Press Says

 The 2010 Mercedes-Benz E-Class ranks 1 out of 13 Luxury Large Cars. This ranking is based on our analysis of 52 published reviews and test drives of the Mercedes-Benz E-Class, and our analysis of reliability and safety data.

The Mercedes-Benz E-Class held the top spot in our Luxury Large Car rankings for most of 2008 and 2009, but Mercedes has improved it anyway. Entirely redesigned for 2010, the new E-Class has a new sense of style inside and out. It features more athletic road manners than the car it replaces and, incredibly, a lower price. The new E-Class is a must-see for every luxury large car shopper.

The 2010 Mercedes-Benz E-Class doesn’t make any sense. 

It’s a better car than the 2009 E-Class. It has an eye-catching look that’s best seen in person, an opulent interior with an old-world panache that other luxury cars can’t match, a newfound sporty character and a list of safety equipment that boggles the mind. Yet it’s cheaper than the car it replaces. Mercedes improved the E-Class drastically for 2010, then cut its price. A seasoned auto critic with the New York Times writes, “I can’t recall a price cut of this magnitude -- nearly 9 percent -- on any recent car, let alone one that’s been fully redesigned.”

The new car is less-expensive than the old one, but it isn’t cheaply made. The Times continues, “Not only is there no evidence of cost-cutting, but in terms of interior luxury, the E-Class actually moves closer to the flagship S-Class sedan.”
Other Cars to Consider

Still, the Benz won’t be the perfect car for every luxury large car shopper. The BMW 5-Series and Audi A6 are better handlers -- but the E-Class has narrowed the gap, and is now nearly as poised as those cars. 

But there may not be a large sedan with a better balance of luxury, style and performance than this one.
Mercedes-Benz E-Class Sedan: The Details

Safety-conscious shoppers, in particular, should explore the E-Class. It offers all of the typical safety equipment luxury buyers are accustomed to, but also has a new bag of tricks that no competitor can match, including an Attention Assist system designed to help drowsy drivers stay alert, and a system that automatically dims the highbeam headlights to avoid blinding oncoming cars. It’s enough to make the Volvo S80 duck in shame.

The E-Class is also offered in a coupe body style, but shoppers shouldn’t consider the two interchangeable. The E coupe has the same engine and transmission choices as this car, but it’s built on the C-Class chassis, which gives it very different handling dynamics and interior proportions.

The E-Class sedan is available as a V6-powered E350, which reviewers say is an adequate performer but lacks the punch of similar models from BMW and Audi, or a V8-powered E550, which should easily satisfy speedsters. A 4Matic all-wheel-drive system is optional on both. A hybrid model and a diesel-powered edition are expected to join the E-class stable for the 2011 model year, but neither has yet been made available to the press. The high-performance E63 AMG is covered in a separate review.

Audi Releases “The Tony Stark Innovation Challenge”

In celebration of the April 26 world premiere of Iron Man 2 in Los Angeles, Audi of America, Inc. announced that it is launching a social media competition called “The Tony Stark Innovation Challenge” in support of its prominent presence in the film.

This is actually a social media competition which asks for the competitors to submit an up to two-minute video that displays their ideas for better living through the use of technology. The winner of the Audi Tony Stark Innovation Challenge will receive a 15,000 USD prize to fund the idea.

Tony Stark is forgoing weapons manufacturing and adopting a new business philosophy. As part of his latest venture, Tony has joined forces with the Stark Expo and Audi to challenge you to submit ideas for "Better Living through Technology."

Tony Stark will be seen throughout Iron Man 2 in his Audi R8 Spyder, the new soft top convertible version of the R8 super car which was featured in the first Iron Man. In addition to the R8 Spyder, the A8 sedan will also be showcased in the film.





Press Release

Audi announces “The Tony Stark Innovation Challenge”

- Contest calls for ideas for “living better through technology”

- Winner receives $15,000 to help fund their idea and a tech-lovers’
adventure

- Social media program to support the Audi Iron Man 2 integration

HERNDON, Va., Apr 27, 2010 - In celebration of the April 26 world
premiere of Paramount Pictures and Marvel Entertainment’s Iron Man 2 in Los
Angeles, Audi of America, Inc., announced that it is launching a social
media competition called “Stark Expo & Audi Present: The Tony Stark
Innovation Challenge” in support of its prominent presence in the film,
which releases on May 7. Beginning April 28, consumers can submit up to
two-minute videos that showcase their ideas for better living through the
use of technology, just as Tony Stark did with the Stark Expo. Participants
then must rally members of their Facebook, Twitter, MySpace and other social
media networks to rate, comment, and discuss their ideas. Full contest
information and rules are available at www.TonyStarkInnovationChallenge.com.

“Achieving progress through technology is the message behind Iron Man 2,
and this idea is fundamental to Audi,” said Scott Keogh, Chief Marketing
Officer, Audi of America. “The partnership in Iron Man 2 celebrates our
shared focus on innovation, and this contest allows anyone with a great idea
to not just express it, but potentially make a true difference within their
industry.”

“The Tony Stark Innovation Challenge” mirrors Tony Stark’s desire to take
Stark Industries in a new direction, using his vast intellect and resources
to eradicate problems through technology. Submissions will be judged by Audi
on their ability to:

• Make the world a better place by solving a problem or improving an
existing solution

• Articulate and demonstrate expertise of the “better living through
technology” philosophy

• Have a scalability and adaptability to potentially change the way we live

• Showcase innovation, adventures, and intelligence worthy of Audi and Tony
Stark

• Appeal to the general audience as viewer ratings will help determine top
entries

The winner will receive:

• $15,000 in funding to develop their concept

• Their experience documented and featured on www.audiusa.com

• A four-day trip for two to California including air transportation, hotel
and meals

• Transportation in the latest innovation from Audi, the 2011 A8

• Spa treatments, tailored cocktail attire, and grooming to perfect their
Stark style

• A tour of Audi Design Center in Santa Monica

• A VIP day with the ICON Aircraft team, joining them in flight and water
testing of the innovative ICON A5 aircraft (one of Tony Stark’s toys)

• A day at the Audi Sports Car Experience to drive Tony Stark’s favorite
car, the Audi R8 on a racetrack

Audi will also be lending its support to the film through activities
including a month-long late night TV and national cable campaign and an
online presence on Fandango.com and Movies.com. The brand is also unveilng
an all-new Audi Iron Man ad that will run in cinemas in the month leading up
to the film release. Additionally, Audi is sponsoring the re-launch of
Marvel.com that will include a digital comic book featuring the R8 Spyder.

Tony Stark will be seen throughout Iron Man 2 in his Audi R8 Spyder, the
new soft top convertible version of the R8 super car which was featured in
the first Iron Man. In addition to the R8 Spyder, the A8 sedan will also be
showcased in the film.

The video submission period starts April 28, 2010 and ends June 9, 2010.
The voting period starts April 28, 2010 and ends June 13, 2010. Approved
submissions will be posted to the site within 48 hours. Users can rate video
submissions once per day, for the length of the contest participation period
on a scale from one to five. Final ratings will be calculated toward the
final score of each entry and will help determine the grand prize winner.
Finalists will be selected shortly after the submissions end. Clearance,
notifications and interviews will take place between June 17, 2010 and June
25, 1010, and the winner will be announced the week of June 28, 2010. Prizes
will be redeemed in August 2010. Submissions are only accepted in English
and from residents of the 50 U.S. and D.C. who are 18 and over and who
possess a valid driver’s license.

Lotus Engineering demonstrates the lightweight future of the passenger car

Lotus Engineering conducted two studies to look at the possibility of developing passenger vehicles from 2017. The specialised lightweight sports car maker says its long-time philosophy of weight reduction will benefit potential customers in the areas of fuel consumption and C02 emissions.

company engineers discovered that by improving the aerodynamics by 80 counts, the car netted a six mile per gallon improvement in its highway fuel economy rating (note: a "count" is a thousandth of a point of a Cd number, so reducing a Cd of 0.150 by 50 counts would give you a Cd of 0.100). On the flipside, taking out 400 pounds of stuff only improved the car's highway mpg by one mile a gallon, though that's largely because of the Newtonian "an object in motion tends to stay in motion unless acted upon by an outside force" hubbub.

The interior systems include 50% lighter seats, climate control hardware, navigation electronics and others. There is a high level of component integration for space maximisation and weight minimisation. An example is the audio/ air conditioning/navigation touch screen which also contains the shifter and parking brake functions. Chassis and suspension components are to be downsized, the glazing and width of the windscreen possibly reduced and replaced with an appropriate, lower weight substitute.





Press Release

• Study by Lotus Engineering concludes that a vehicle mass improvement
  of 38% versus a conventional mainstream vehicle can be achieved at only
  3% cost.

• Efficient design and lightweight materials significantly reduce CO2
  emissions.

Lotus Engineering has conducted a study to develop a commercially viable
mass reduction strategy for mainstream passenger vehicles. This study,
released by the International Council on Clean Transportation, focused on
the use of lightweight materials and efficient design and demonstrated
substantial mass savings. When compared with a benchmark Toyota Venza
crossover utility vehicle, a 38% reduction in vehicle mass, excluding
powertrain, can be achieved for only a 3% increase in component costs using
engineering techniques and technologies viable for mainstream production
programmes by 2020. The 2020 vehicle architecture utilises a mix of stronger
and lighter weight materials, a high degree of component integration and
advanced joining and assembly methodologies.

Based on U.S. Department of Energy estimates, a total vehicle mass
reduction of 33% including powertrain, as demonstrated on the 2020 passenger
car model, results in a 23% reduction in fuel consumption. This study
highlights how automotive manufacturers can adopt the Lotus philosophy of
performance through light weight.

Dr Robert Hentschel, Director of Lotus Engineering said: "Lighter
vehicles are cleaner and more efficient. That philosophy has always been
core to Lotus' approach to vehicle engineering and is now more relevant than
ever. Lightweight Architectures and Efficient Performance are just two of
our core competencies and we are delighted to have completed this study with
input from the National Highway Traffic Safety Administration and the U.S.
Environmental Protection Agency to provide direction for future CO2
reductions. We believe that this approach will be commonplace in the
industry for the future design of vehicles."

The study investigated scenarios for two distinct vehicle architectures
appropriate for production in 2017 and 2020. The near-term scenario is based
on applying industry leading mass reducing technologies, improved materials
and component integration and would be assembled using existing facilities.
The mass reduction for this nearer term vehicle, excluding powertrain, is
21% with an estimated cost saving of 2%.

A benchmark Toyota Venza was disassembled, analysed and weighed to
develop a bill of materials and understand component masses. In developing
the two low mass concepts, Lotus Engineering employed a total vehicle mass
reduction strategy utilising efficient design, component integration,
materials selection, manufacturing and assembly. All key interior and
exterior dimensions and volumes were retained for both models and the
vehicles were packaged to accommodate key safety and structural dimensional
and quality targets. The new vehicles retain the vision, sight line, comfort
and occupant package of the benchmarked Toyota Venza.

Darren Somerset, Chief Executive Officer of Lotus Engineering
Incorporated, Lotus' North American engineering division which led the
study, said "A highly efficient total vehicle system level architecture was
achieved by developing well integrated sub-systems and components,
innovative use of materials and process and the application of advanced
analytical techniques. Lotus Engineering is at the forefront of the
automotive industry's drive for the reduction in CO2 and other greenhouse
gas emissions and this study showcases Lotus Engineering's expertise and
outlines a clear roadmap to cost effective mass efficient vehicle
technologies."

Mass and Cost Summary

Base Toyota Venza excluding powertrain		Lotus Engineering Design
System	Weight (kg)	2020 Venza		2017 Venza
		% Mass Reduction	% Cost Factor	% Mass Reduction	% Cost Factor
Body	383	42%	135%	15%	98%
Closures/Fenders	143	41%	76%	25%	102%
Bumpers	18.0	11%	103%	11%	103%
Thermal	9.25	0%	100%	0%	100%
Electrical	23.6	36%	96%	29%	95%
Interior	252	39%	96%	27%	97%
Lighting	9.90	0%	100%	0%	100%
Suspension/Chassis	379	43%	95%	26%	100%
Glazing	43.7	0%	100%	0%	100%
Misc.	30.1	24%	99%	24%	99%
Totals	1290	38%	103%	21%	98%

The full report, entitled ‘An Assessment of Mass Reduction Opportunities for
a 2017 - 2020 Model Year Vehicle Program' can be found at the following
link:

http://www.theicct.org/documents/0000/1430/Mass_reduction_final_2010.pdf

ENDS

The 2020 Passenger Car Technical Detail

Body

The body includes the floor and underbody, dash panel assembly, front
structure, body sides and roof assembly. The baseline Toyota Venza
body-in-white contained over 400 parts and the revised 2020 model reduced
that part count to 211. The body-in-white materials used in the baseline
Venza were 100% steel, while the 2020 model used 37% aluminium, 30%
magnesium, 21% composites and 7% high strength steel. This reduces the
structure mass by 42% from 382 kg to 221 kg.

The low mass 2020 body-in-white would be constructed using a low energy
joining process proven on high speed trains; this process is already used on
some low volume automotive applications. This low energy, low heat friction
stir welding process would be used in combination with adhesive bonding, a
technique already proven on Lotus production sports cars. In this instance,
the robotically controlled welding and adhesive bonding process would be
combined with programmable robotic fixturing, a versatile process which can
be used to construct small and large vehicles using the same equipment.

Closures/Fenders

The closures include all hinged exterior elements, for example, the front
and rear doors and the rear liftgate. One alternative approach included
fixing the primary boot section to improve the structure, reduce masses and
limit exposure to high voltage systems. A lightweight access door was
provided for checking and replacing fluids.

The closures on the baseline Toyota Venza were made up of 100% steel. The
low mass Venza closures/fenders would be made up of 33% magnesium, 21%
plastic, 18% steel, 6% aluminium with the other 22% consisting of multiple
materials. The mass savings are 41%, a reduction from 143 kg to 84 kg.

Interior

The interior systems consist of the instrument panel, seats, soft and
hard trim, carpeting, climate control hardware, audio, navigation and
communication electronics, vehicle control elements and restraint systems.
There is a high level of component integration and electronic interfaces
replace mechanical controls on the low mass model. For the 2020 model the
instrument panel is eliminated replaced by driver and passenger side modules
containing all key functional and safety hardware. A low mass trim panel
made from a high quality aerated plastic closes out the two modules. The air
conditioning module is incorporated into the console eliminating the need
for close out trim panels; heated and cooled cupholders are integrated into
the HVA/C module. The audio/HVA/C/Navigation touch screen contains the
shifter and parking brake functions and interfaces with small electric
solenoids. This eliminates conventional steel parking brake and shifter
controls and cables as well as freeing up interior space.

The front seats mount to the structural sill and tunnel structure
eliminating conventional seat mounting brackets (10 kg) and the need to
locally reinforce the floorpan. The composite front seat structure utilises
proven foam technology; the seat mass is reduced by up to 50%. The rear seat
support structure is moulded into the composite floorpan eliminating the
need for a separate steel support structure. The front and rear seats use a
knit to shape fabric that eliminates material scrap and offers customers the
opportunity to order their favourite patterns for their new vehicle. Four
removable carpet modules replace the traditional full floor carpeting; this
reduces mass and allows cost effective upgrading of the carpet quality. The
floorpan is grained in all visible areas. The 2017 production interior mass
was reduced from 250 kg to 182 kg with projected cost savings of 3%. The
2020 production interior mass was 153 kg with projected cost savings of 4%.

Chassis/Suspension

The chassis and suspension system was composed of suspension support
cradles, control links, springs, shock absorbers, bushings, stabilizer bars
and links, steering knuckles, brakes, steering gearbox, bearings, hydraulic
systems, wheels, tires, jack and steering column.

The chassis and suspension components were downsized based on the revised
vehicle curb weight, maintaining the baseline carrying capacity and
incorporating the mass of the hybrid drive system.

The total vehicle curb weight reduction for the 2020 vehicle was 38%,
excluding the powertrain. Based on the gross vehicle weight, which includes
retaining the baseline cargo capacity of 549 kg and utilising a hybrid
powertrain, the chassis and the suspension components were reduced in mass
by 43%, with projected cost savings of 5%.

Front and Rear Bumpers

The materials used on the front and rear bumpers were very similar to the
existing model to maintain the current level of performance. One change was
to replace the front steel beam with an aluminium beam which reduced mass by
11%. The use of a magnesium beam was analysed but at the current time
exceeded the allowable price factor.

Heating, Ventilation and Air Conditioning

The air conditioning system was integrated into a passenger compartment
system and an engine compartment system. This section addressed the under
hood components which included the compressor, condenser and related
plumbing. The under hood components were investigated for technologies and
mass.

The study showed a relatively small mass difference for the underhood air
conditioning components based on both vehicle mass and interior volume.
Because of the highly evolved nature of these components, the requirements
for equivalent air conditioning performance and the lack of a clear
consensus for a future automotive refrigerant, the mass and cost of the
Toyota Venza compressor, condenser and associated plumbing were left
unchanged for both the 2017 and 2020 models.

Glazing

The glazing of the baseline vehicle was classified into two groups: fixed
and moving. The fixed glass is bonded into position using industry standard
adhesives and was classified into two sub groups: wiped and non wiped.

Factors involved in making decisions about glazing materials include the
level of abrasion it is likely to see during the vehicle life, the
legislative requirements for light transmissibility, the legislative
requirements for passenger retention and the contribution it will make to
interior noise abatement.

The specific gravity of glass is 2.6 and the thickness of a windshield is
usually between 4.5 mm and 5 mm, therefore the mass per square metre of 5 mm
glass is approximately 13 kgs. The high mass of glass provides a strong
incentive to reduce the glazed area of the body, reduce the thickness of the
glass and find a suitable substitute that is lighter. Fixed glass on the
side of the vehicle offers the best opportunity for mass reduction.

The mass of the baseline glazing was retained for both the 2017 and 2020
models; this was a conservative approach. It is possible that coated
polycarbonate materials may become mainstream in the 2017 - 2020 timeframe
for fixed applications.

Electrical/Lighting

The estimated mass savings for using thinwall cladding and copper clad
aluminium wiring, as used on the 2017 model was 36% versus the baseline
model. The lighting technologies section reviewed included diodes, xenon and
halogen. The study also reviewed a variety of wireless technologies under
development for non-transportation applications that could be used in this
time period pending successful development for mobile applications.

Ford Fiesta S1600 Special Edition

Ford has announced a limited series sport variant of the Fiesta model - the Fiesta S1600 - for the U.K. market.

The Ford Fiesta S1600 is based on the Fiesta Zetec-S and comes with a range of extra equipment. The power of the Ford Fiesta S1600 comes from the 1.6-litre Duratec Ti-VCT petrol engine that develops 120PS which can be fitted with a Mountune engine upgrade package.

The Fiesta S1600 is based on the Zetec-S trim level and adds a range of sport equipment such as heated leather sports seats, motorsport-branded floor mats and scuff plates, and alloy pedals.

The exterior sports a body-styling kit including a new front bumper, large rear spoiler and diffuser, 17” white alloy wheels and a choice of white or blue body colour with motorsport stripes.

On the interior, the Fiesta will get heated, stitched leather sports seats with standard side-airbags, leather steering wheel, handbrake cover, and gearknob, plus Motorsport-branded floor mats and scuff plates.

The Fiesta S1600 will be limited to only 650 units and is now avaiable for order at Ford dealers in the U.K..
Prices start at £16,665 (€19,152).




Press Release

NEW FORD STAR WITH STRIPES - FASTER FIESTA CONTINUES PROUD HERITAGE

BRENTWOOD, Essex, 26 April, 2010 - The thoroughbred lineage of fast Fords has a new addition to the family, in the eye-catching new Fiesta S1600.

Based on the popular Fiesta Zetec-S - with a generous standard specification that includes alloy pedals and Quickclear windscreen - the sporty Fiesta S1600 interior adds heated, stitched leather sports seats with standard side-airbags, leather steering wheel, handbrake cover and gearknob, plus Motorsport-branded floor mats and scuff plates.

On the outside, the sporting pedigree is made clear, through a comprehensive

body-styling kit that includes a unique front bumper with flared lower valence panel, extended side skirts, large rear spoiler and rear diffuser, finished with 17-in, white alloy wheels (16-in on diesel models). The newcomer's special paint finish is available in Frozen White or Performance Blue, with contrasting motorsport stripes.

Performance comes from a choice of Fiesta's responsive 1.6-litre, 120PS Duratec

Ti-VCT petrol engine, or improved 1.6-litre Duratorq TDCi engine, now with 95PS. For performance enthusiasts, a further engine upgrade package will be offered via Ford's established performance tuning partner, Mountune.

Fiesta S1600 continues a 30-year sporting Fiesta bloodline that began with the Mk1 XR2 in 1981 and has included Supersport, XR2(i), Si, RS and ST models.

Gill Palmer, Ford of Britain's Fiesta Product Manager, said: "Since its introduction, Fiesta and sporting pedigree have never been far apart and the latest incarnation of that is S1600, bringing extra motorsport feel to the award-winning Fiesta style and driving quality."

Fast Ford fans are encouraged to act quickly, with only 650 of these special faster Fiestas being created. They are available now from Ford dealers, priced from £16,665 on-the-road.

The New Car Caterham R500

Yellow Car Caterham R500


White Car Caterham R500


Blue Car Caterham R500